- Dredging Hose
- Cement Hose
- Super Trunk Hose
- Grain Hose
- Elasdum Hose
- Bulk Handling Suction
- Delivery Trunk Hose
Dredging Hose
Rubber hose for dredging work at rivers, harbors and seas
Proper Application
Sand discharge line of dredging work
River harbor construction, development of industrial area
Characteristics
- High strength and excellent in kinking resistance.
- Excellent durability owing to rubber material with high strength and abrasion resistance used in inner and outer rubber layers.
Kind
Standard Specifications
Built-in Type
| ND (A) |
ID (mm) |
Thickness of Inner Rubber (mm) |
Working Pressure (MPa) |
Bend Degree | Weight (kg) |
Standard Length (mm) |
|---|---|---|---|---|---|---|
| 200 | 203 | 10 | 0.5 | 10° | 55 | 800 |
| 250 | 254 | 10 | 0.5 | 10° | 70 | 800 |
| 300 | 305 | 15 | 0.5 | 10° | 100 | 900 |
| 350 | 355 | 15 | 0.6 | 10° | 125 | 1,000 |
| 410 | 406 | 20 | 0.6 | 10° | 175 | 1,000 |
| 510 | 510 | 20 | 0.8 | 10° | 285 | 1,200 |
| 560 | 560 | 20 | 0.8 | 10° | 340 | 1,300 |
| 610 | 610 | 25 | 1.0 | 10° | 425 | 1,300 |
| 630 | 630 | 25 | 1.0 | 10° | 440 | 1,400 |
| 660 | 660 | 25 | 1.0 | 10° | 480 | 1,500 |
| 710 | 710 | 30 | 1.2 | 10° | 620 | 1,600 |
| 760 | 760 | 30 | 1.5 | 10° | 720 | 1,700 |
Cement Hose
Abrasion resistant hose for delivery and suction of cement powder
Proper Application
Used between tanker and land facilities to absorb the movement which occur between facilities during pneumatic transportation of cement powder.
Very useful for improvement of connection.
Characteristics
- Inner rubber has great heat and abrasion resistance against dry abrasion.
- Partial abrasion is hardly occur owing to strong and soft design.
Standard Specifications
Standard Length: 10m
| ND | ID | OD | Cord P-CP |
Number of Wiire | Working Pressure | Weight | Min. Bend Radius | ||
|---|---|---|---|---|---|---|---|---|---|
| Hose | Fittings | ||||||||
| (A) | (in.) | (mm) | (mm) | (MPa) | (kg/m) | (kg/set) | (mm) | ||
| 150 | 6 | 152.4 | 193 | 1-4 | 1 | 0.98 | 16.3 | 27.2 | 1,050 |
| 200 | 8 | 203.2 | 259 | 1-6 | 2 | 0.98 | 31.0 | 35.0 | 1,400 |
| 250 | 10 | 254.0 | 305 | 1-6 | 2 | 0.98 | 31.0 | 35.0 | 1,400 |
| 300 | 12 | 304.8 | 373 | 2-6 | 2 | 0.98 | 50.5 | 70.8 | 2,100 |
| 350 | 14 | 339.8 | 405 | 2-6 | 2 | 0.98 | 59.0 | 90.2 | 2,450 |
- Weight of metal fitting is based on JIS-10K flange.
- OD and weight data may be changed due to working pressure and service condition.
Super Trunk Hose
Proper Application
Suction and discharge of sand slurry transfer to sand pump dredger, suitable for reel and hanging type.
Characteristics
- Inner rubber has abrasion resistance with highest quality.
- Thick hard steel helix wires and strong synthesis fiber cords bring small bend radius and excellent rigidity.
- Smooth inside owing to special design.
- Excellent in kinking resistance.
Standard Specifications
Max. Manufacturable Length: 10m
Vacuum Pressure Resistance: -100KPa
| ND | ID | OD | Cord CP | Number of wiire | Working Pressure | Bend Radius | Weight | ||
|---|---|---|---|---|---|---|---|---|---|
| Hose | Fittings | ||||||||
| (A) | (in.) | (mm) | (mm) | (MPa) | (mm) | (kg/m) | (kg/set) | ||
| 400 | 16 | 381 | 500 | 12 | 2 | 0.98 | 1,600 | 132 | 127.2 |
| 450 | 18 | 432 | 555 | 12 | 2 | 0.98 | 1,800 | 156 | 154.2 |
| 500 | 20 | 482 | 627 | 14 | 2 | 0.98 | 2,000 | 176 | 191.8 |
| 550 | 22 | 531 | 680 | 14 | 2 | 0.98 | 2,200 | 222 | 220.6 |
| 600 | 24 | 575 | 730 | 14 | 2 | 0.98 | 2,400 | 241 | 266.4 |
| 650 | 26 | 635 | 790 | 14 | 2 | 0.98 | 2,600 | 282 | 289.8 |
- Weight of metal fitting is based on JIS 10K standard.
Grain Hose
Abrasion resistant hose for suction of cereals
Proper Application
-
Connected to pipes of unloading equipment for pneumatic transportation of cereals
(Wheat, soy bean, corn, milo etc)
Characteristics
- Swelling resistance against vegetable oil.
- Special rubber material which has high strength and reinforcement brings dry-abrasion resistance.
- Build-in type with metal fittings.
Structure
The picture above is very simple.
Please feel free to contact us for more information.
Standard Specifications
Standard Length: 3500m
| ND | ID mm |
Thickness of Inner Rubber mm |
Number of Wire | Working Pressure KPa |
Min. Bend Radius mm |
Weight kg/m |
|---|---|---|---|---|---|---|
| 220 | 216.3 | 10 | 1 | -50 | 1320 | 31.8 |
| 270 | 267.4 | 1620 | 41.0 | |||
| 305 | 304.8 | 12 | 1830 | 54.8 | ||
| 325 | 323.9 | 1950 | 60.2 | |||
| 340 | 339.8 | 2040 | 63.5 | |||
| 350 | 355.6 | 2100 | 72.9 | |||
| 380 | 381.0 | 2280 | 77.6 | |||
| 390 | 390.0 | 2340 | 78.8 | |||
| 450 | 457.0 | 15 | 2700 | 108.3 |
OD and weight data is not garanteed, and may be changed due to working pressure and service condition.
Elasdum Hose
High abrasion resistant hose for dry powder delivery
Proper Application
- Dry abrasion line of powder delivery
(Sand, grid, powdered coal, grain, cement etc)
Characteristics
- Composite of aluminum ceramics and rubber with high elasticity and strength for inner material.
- Excellent abrasion resistance against dry abrasion.
Specifications of Inner Rubber Layer
Inner rubber is complied by composite of ceramic balls (diameter φ3 to 10) and binder rubber with strong adhesion.
Structure
Straight Type (No Fittings)
Build-in Nipple Type
Enlarged End Type
Standard Specification
Max. Manufacturable Length: 10m
| ND | in. | ID mm |
OD mm |
Working Pressure MPa |
Weight kg/m |
|---|---|---|---|---|---|
| 25 | 1 | 25.4 | 52 | 0.98 | 3.7 |
| 32 | 1-1/4 | 31.8 | 58 | 4.2 | |
| 40 | 1-1/2 | 38.1 | 66 | 5.1 | |
| 50 | 2 | 50.8 | 79 | 6.1 | |
| 65 | 2-1/2 | 63.5 | 93 | 7.4 | |
| 80 | 3 | 76.2 | 105 | 8.5 | |
| 100 | 4 | 101.6 | 138 | 15.5 | |
| 125 | 5 | 127.0 | 166 | 19.7 | |
| 150 | 6 | 152.4 | 192 | 24.4 |
OD and weight data is not garanteed, and may be changed due to working pressure and service condition.
Bulk Handling Suction & Delivery Hose
Proper Application
- Sand suction, sand collection, delivery with great abrasion
Characteristics
- Inner rubber has abrasion resistance with highest quality.
- Metal fitting part is lined with the same qualitative rubber as inner rubber layer.
Metal fittings will not have early abrasion.
Standard Specifications
Max. Manufacturable Lenght: 10m
Max. Working Pressure: 0.49MPa
| ND | ID mm |
OD mm |
Cord P-CP |
Wire | Weight | ||
|---|---|---|---|---|---|---|---|
| (A) | (in.) | Hose (kg/m) |
Fittings (kg/set) |
||||
| 40 | 1-1/2 | 38.1 | 58 | 1-2 | 1 | 2.5 | 2.8 |
| 50 | 2 | 50.8 | 73 | 3.6 | 3.8 | ||
| 65 | 2-1/2 | 63.5 | 86 | 4.3 | 5.2 | ||
| 80 | 3 | 76.2 | 99 | 4.9 | 6.8 | ||
| 100 | 4 | 101.6 | 127 | 7.6 | 9.0 | ||
| 125 | 5 | 127.0 | 155 | 10.1 | 12.2 | ||
| 150 | 6 | 152.4 | 186 | 13.9 | 18.6 | ||
| 200 | 8 | 203.2 | 243 | 20.8 | 26.2 | ||
| 250 | 10 | 254.0 | 297 | 1-4 | 31.6 | 39.4 | |
Weight of metal fitting is based on JIS 5K flange.
Working Pressure:0.98MPa
| ND | ID mm |
OD mm |
Cord P-CP |
Wire | Weight | ||
|---|---|---|---|---|---|---|---|
| (A) | (in.) | Hose (kg/m) |
Fittings (kg/set) |
||||
| 40 | 1-1/2 | 38.1 | 59 | 1-2 | 1 | 2.6 | 4.2 |
| 50 | 2 | 50.8 | 74 | 3.7 | 5.4 | ||
| 65 | 2-1/2 | 63.5 | 87 | 4.5 | 7.4 | ||
| 80 | 3 | 76.2 | 100 | 5.4 | 7.8 | ||
| 100 | 4 | 101.6 | 129 | 8.2 | 10.4 | ||
| 125 | 5 | 127.0 | 157 | 10.8 | 15.0 | ||
| 150 | 6 | 152.4 | 187 | 1-4 | 15.1 | 22.2 | |
| 200 | 8 | 203.2 | 244 | 24.4 | 28.4 | ||
| 250 | 10 | 254.0 | 302 | 35.5 | 44.2 | ||
Weight of metal fitting is based on JIS 10K flange.
OD and weight is not garanteed, and may be changed due to working pressure and service condition.
Delivery Trunk Hose
Proper Application
- Discharge of sea sand slurry for sand pump dredger
Characteristics
- Inner rubber has abrasion resistance with highest quality.
- Wireless hose with high strength, rigidity and tension.
Strong synthesis fiber cords binded with special rubber are composed in the hose - Excellent in kinking resistance.
Standard Specifications
Max. Manufacturable Length: 10m
| ND | ID (mm) |
OD (mm) |
Thickness of Inner Rubber (mm) |
Cord CP |
Working Pressure (MPa) |
Weight | ||
|---|---|---|---|---|---|---|---|---|
| (A) | (in.) | Hose (kg/m) |
Fittings (kg/set) |
|||||
| 400 | 16 | 381 | 450 | 20 | 8 | 0.98 | 52 | 127.2 |
| 450 | 18 | 432 | 508 | 10 | 63 | 154.2 | ||
| 500 | 20 | 482 | 562 | 12 | 75 | 191.8 | ||
| 550 | 22 | 531 | 615 | 25 | 12 | 96 | 220.6 | |
| 600 | 24 | 575 | 665 | 14 | 103 | 266.4 | ||
| 650 | 26 | 635 | 735 | 16 | 120 | 289.8 | ||
Weight of metal fitting is based on JIS 10K flange.
OD and weight data is not garanteed, and may be changed due to working pressure and service condition.
All Products
-
Rubber & Flake Lining
-
Rubber Hose
-
Rubber & Plastic Extrusion
-
Rubber Molding